Advanced calling features – Tekkeon ET7000 User Manual
Page 14
Muting myTalker
You can mute and unmute the microphone temporarily so that you cannot be
heard by the connected party.
To Mute myTalker
1. With a call connected to myTalker, press the MUTE button.
You will hear a soft
beep.
To Unmute myTalker
1. When the microphone is muted, press the MUTE button.
Advanced Calling Features
You can use myTalker to place a call on hold, answer a call waiting call, and initiate
a three-way conference with two other callers, if these features are supported by
your Bluetooth mobile phone.
Call Hold
To Place a Call on Hold
1. With a call connected to myTalker, press the ADD CALLER button until you hear
a short beep followed by a long tone (approximately 3 seconds).
The call will be
placed on hold, which will be indicated on your mobile phone.
12
et7000_ug_fnl_R 1/24/06 2:48 PM Page 12