Toshiba HD-E1KY - Manual (Page 58)

58
6
Chapter
6
Others
Customizing the function settings (Continued)
Maintenance
Initialize
To reset all the settings listed on page 51 to factory set
default.
Press / buttons to select “Yes” then press OK button.
Update (Firmware update)
If you have a broadband internet service you may obtain
fi rmware updates over the internet using the LAN port
on the back of your player. ( pages 44 to 46 for
information on confi guring and connecting your LAN port.)
Then follow these steps:
Make sure no disc is loaded in the player.
Press SETUP and select Maintenance. Follow the
instructions on the screen.
If no update is available, a message will note this and
the process will terminate.
If an update is available, the player will download it
showing the status of the process on its display.
Do not attempt to roll back to a prior fi rmware version.
This may damage your player.
Caution
Do not unplug, turn off or use any other feature of the
player during the download. The writing of the software
being downloaded will be halted and the player may
no longer work properly. If the player stops working,
contact Toshiba customer service.
Persistent Storage
To open the menu to control player’s memory allocated for
content. (Not available while a disc is loaded.)
The menu selections will vary depending on the content.
Operate following the instructions displayed on your
screen.
(including internet fi rmware update)
General
Twin Format Disc
To select a layer to play, HD DVD or DVD of an HD DVD Twin
Format Disc. (Not available if a disc is loaded.)
HD DVD
Only the HD DVD layer is played.
DVD
Only the DVD layer is played.
Note
For combination discs, select the desired version by disc
side (see label for information).
HD-E1KY_06_E 58 HD-E1KY_06_E 58 06.12.15 0:09:34 AM 06.12.15 0:09:34 AM