Toshiba W-627 - Manual (Page 25)

25
RECORDING
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from
9:20 p.m. until 10:00 p.m. on August 30. Today is August 25.
1
Load a cassette with the safety tab attached.
2 Press PROG. to display the MENU screen.
3
Select “PROGRAM” using FF or
REW, and press ENTER.
4 Move to the next using FF, and
select the channel number 25 by
pressing
number buttons 2 and 5,
PLAY/x2 or STOP.
• To record a cable program from the connected cable box:
Enter the cable channel number by number buttons, PLAY/x2 or
STOP.
If your cable box is not remote-controllable, choose the desired
channel (1 to 125) on the cable box.
• You can make “L1” or “L2” appear on the channel number position
by pressing I.SELECT depending on your connection.
(See pages 8 and 12).
To make corrections:
Press
REW to move back to the item, or FF to forward.
(Continued)
Timer Program Recording
The programmable timer allows you to record up to 6 different programs over one month.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 15).
• Store the channels on the VCR (pages 16 and 17).
RECORDING
TV VCR
PROG. ENTER
TV/ VCR
POWER
CH/TRK
TV VOL
I.SELECT
REMAIN/ COUNTER DISPLAY COUNT RESET
SP/ SLP REC TIMER
SLOW PLAY/x2 PAUSE/STILL
REW F F
CANCEL
A.SELECT
EJECT CM SKIP
CURSOR
STOP
1 2 3
4 5 6
7 8 9
0 100
Number
buttons
10
PLAY/x2
STOP
ENTER
REW
2,9
FF
W-627 Eng (24-28) 2/28/02, 3:28 PM 25