TOA Electronics CUSTOM SERIES CR-3835L - Manual (Page 20)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 20
Take Off Boot 91L04 FATO
FINISH TO YOUR TASTE
There are a wide variety of “finished looks” for
these fireplaces, from formal wall decor with
elaborate mantels to rustic wood paneling or
warm brick facings.
Only noncombustible materials like stone, tile,
brick, etc., may overlap the black front facing.
Do not extend these materials beyond the black
facing and into the firebox area. Be sure not to
interfere with the installation and operation of
glass doors or block the upper or lower grilles.
Seal all joints between the black facing and wall
surrounds to prevent air intrusion. Use non-
combustible caulking material only to seal the
black metal facing to the surround material on
the finished wall.
Combustible materials may project beyond the
sides of the fireplace opening as long as they
are kept within the shaded areas illustrated in
Figure 46.
Model Part Number Weight
CR-3835R P/N 015014 210 lbs.
CR-3835L P/N 015013 210 lbs.
63L30 F8FS30
63L32 F8FS30-2
Firestop Spacer (30 ° ) 63L37 F10FS30-2
63L22 FTF8-ES30
Offset/ Return 63L23 FTF10-ES30
Package (30 ° ) 22154 FTF10/8-ES30
INSTALLATION COMPONENTS
The following items are available for use in the
installation of this appliance.
Combination 63L28 FTF8-OR15
Offset/Return Elbow 63L34 FTF10-OR15
12"
Min. Distance To
Unprotected Side Wall
8"
45 °
Combustible
Materials
Allowed In
Shaded Area
“Safe Zone”
8"
Min. Distance To
Protected Side Wall
Fireplace
11 ⁷⁄₈”
15 ⁷⁄₈”
Figure 46
Starter Section 8345 FTF8-SS
Attic Shield Assembly
Firestop Spacer
63L67 FTF8-FSAS
Canada Only 63L68 FTF10-FSAS
63L10 FTF8-12
63L13 FTF8-18
63L14 FTF8-36
63L15 FTF8-48
63L16 FTF10-12
63L17 FTF10-18
Chimney Section 63L18 FTF10-36
62L92 FTF8-18C
62L93 FTF8-36C
Canadian 62L94 FTF10-18C
Outside Chimney 62L95 FTF10-36C
Storm Collar 63L59 FSC
63L38 F8F6
63L39 F8F12
63L40 F10F6
Flashing 63L41 F10F12
Locking Band 63L60 FLB