Toshiba CN36V51 - Manual (Page 9)

3
Ref
er
ence
W
elcome to Toshiba
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V
’s
F
eatur
es
Appendix
Index
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should place the A/B switch in the “A” position so that you can
use the TV features. When viewing premium channels, switch to “B”
and tune the TV to channel 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels.
You will need:
• one two-way signal splitter
• one A/B switch
• four coaxial cables
ANT (75 Ω )
IN OUT DVD IN
VIDEO COLOR
STREAM
INPUT VIDEO 2 VIDEO 1
MONO L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
VIDEO
Cable lead-in
A/B switch
(not supplied)
cable converter box
IN OUT
OUT
A
IN
B
Two-way
signal
splitter
(not supplied)
TV
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. You should keep your TV
selected to TV so that you can use the TV’s features. When viewing
premium channels or recording with the VCR, select Video-1, turn
on the VCR and set the channel to 3 or 4 (whichever channel is
vacant in your area), then use the cable converter box to change
channels. To watch a basic cable channel while recording with the
VCR, the TV should be left in TV mode.
You will need:
• one two-way splitter
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
ANT (75 Ω )
IN OUT DVD IN
VIDEO COLOR
STREAM
INPUT VIDEO 2 VIDEO 1
MONO L/MONO
VIDEO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
L R
IN
TV
Cable lead-in
Two-way
signal
splitter
(not supplied)
cable converter box
IN OUT
Note:
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable. Do
not connect the video cable and the
S-video cable to Video-1 simultaneously.
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.