Telular SX6P-200C - Manual (Page 17)

Placing a Call on Hold
1. During a call, press [Hold]. (A notification will display in the upper right corner of the
LCD display.)
2. To reactivate the call, press [Hold] again.
3-Way Calling
Contact your service provider regarding the availability of 3-way calling.
To perform a 3-way call:
1. Place the first call and wait until it connects.
2. After the first call is connected, dial the second number.
3. Press [Flash]. This connects the second call and puts the first call on hold.
4. Wait for the second call to connect.
5. After you are connected to the second call, press [Flash], which then connects the first call
and completes the 3-way call.
Adjusting the Handset or Speaker Volume
•
During a call, press the up/down arrows to raise ( ) or lower ( ) the handset/speaker volume.
Voicemail Access
Contact your service provider regarding the availability of voicemail.
1. Press [Message].
2. Select 1: Voice Mail.
3. To listen to your voicemail, select 1: Listen.
4. If you have deleted all your messages and the message indicator does not go away after an
hour, press
2: Clr Msg Ind.
Reading Text (SMS) Messages
When you receive a new text message, the envelope icon will appear on the display. To access
messages:
1. Press [Message].
2. Select 2: Read Msgs.
3. Use the up/down arrows ( / ) to select the desired message. Press [Store] to read it.
4. Once you have read the message, you can do the following:
1: Delete
2: Forward
3: Reply
[Flash]: Call: dials the callback number in the message (if available)
Reminder: The Speaker is a “listen-only” feature; you must use the handset to speak with your callers.
Phonecell ® SX6P CDMA 9 User Manual