Telular SX6P-200C User Manual
Page 11
Connecting the Handset
Before you use can use the SX6P, you must connect the handset cable.
1.
Connect the handset cable to the phone jack -
see Figure 7.
2.
Connect the handset cable to the handset -
see Figure 7.
Wall Mounting
1.
Remove the mounting clip from the cradle and re-insert it with the tab pointing up -
see Figures
8 and 9.
2.
Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
Insert
Mounting
Clip into
the Cradle
(tab up)
Mounting Clip in
Cradle (tab up)
Figure 9 – Handset mounting clip for wall-mount.
Remove
Mounting Clip
from the Cradle
(tab down)
Figure 8 – Handset mounting clip assembly.
Phone jack
Handset cable
Handset
Figure 7 – SX6P handset connection.
Phonecell
®
SX6P CDMA
3
User Manual