Technicolor - Thomson DTH 8540 - Manual (Page 65)

65
EN EN
Menus
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select Eco. Standby to enable this function.
Note : the Eco function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
same channels to the same numbers during installation of channels (page 6).
Note : this function is positioned by default on On.
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select RGB,
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
Note : format of image signals:
RGB: English signal colour code (Red – Green – Blue). This is best quality.
S-Video S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
CVBS: composite video signals. This is poor quality.
Scart connector
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 65