Technicolor - Thomson DTH 8540 - Manual (Page 5)

Placing the remote control in service
Inserting the batteries
Using the remote control unit correctly
When you use remote control, point the unit at the appliance you want to control (DVD
recorder,TV set or satellite receiver). Ensure that there is no obstacle between the remote
control unit and the appliance, otherwise the infrared signal carrying the remote control
commands will be blocked.To control your DVD recorder, ensure that the remote control unit is
in DVD mode by pressing once on the DVD key before using any other keys.
Placing the DVD recorder in service
Switch on your DVD recorder and your TV set
1. Turn on your TV set.
2. Set your DVD recorder remote control unit in DVD
mode by pressing once on the
DVD key.
3. Switch on your DVD recorder by pressing the
ON/STANDBY button on the front panel of the
player.
4. The first time you turn on your DVD recorder, it will
ask you to select a preferred language for the various
displays via the menu which appears on your TV
screen. If this menu is not displayed, on your TV
screen select the AV socket to which you connected
your DVD recorder.
Note: The player menus as well as the dialogues and subtitles
of the DVDs will always be presented in the language you’ve
chosen if it is available on the discs played.
5. Choose a language using the , ▼ keys on the remote
control then confirm by pressing OK .
Note: the keys ▲ ▼ .
Continue on the next page …
5
EN EN
Connections and initial set up
1 2 3
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 5