Technicolor - Thomson DTH 8540 - Manual (Page 41)

41
EN EN
Playing a disc
Current time
Clock setting
No. of the channel selected on the DVD
recorder
(page 26).
Name of channel and details of the
programme viewed if the programme guide
(Naviclick)
is available on this channel.
Indications concerning the channel sound and the
selection of audio channels. Selection is possible
with the
B key on the remote control.
Indications concerning the
channel sound and the
selection of audio channels.
Selection is possible with the
B key on the remote control.
Time elapsed since
the start of the recording
Remaining recording time available
on the disc according to the quality
selected (pages 27-59).
Press REC once.To select recording time
press the key several times (while banner
is displayed) to extend recording time by
30 minutes up to a total of 3 hours.
Recording Function
in progress
(page 27).
Interactive banners
In addition to menus, your DVD recorder has interactive information banners with icons
representing functions or information. Some banners provide access to disc playback functions
(for DVDs, CDs,VCDs, etc.) while others give you information on the channels and related
functions.
In television mode (Operating principle)
1. Turn on your TV set and your DVD recorder.
2. In the Main Menu of your DVD recorder, ( Watch TV line selected) press OK .
The picture of the last channel selected appears. An information banner is displayed along
with the picture for a few seconds.To view it again, press the yellow
INFO .
Information on the TV channel being watched
Recording the channel being watched (here, channel 6)
➔ 0h30 ➔ 1h00 ➔ 1h30
3h00 2h30 2h00 ➔ ➔ ➔
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 41