beautypg.com

Installing the driver for mac os x, Uninstalling the driver, Settings on your computer – Tascam US-1800 User Manual

Page 11: Installing cubase le 5, Settings on your computer installing cubase le 5, 3 − installation

background image

TASCAM US-1800

11

Mac OS X

ª

1 Insert the CD-ROM into the PC and double click

TASCAM US-1800 Remover icon.

2 Follow the instructions on the screen for the

remaining procedure.

Frequently asked installation questions and

answers (FAQ)

Windows driver installation
Q: When I connect the unit to a computer, the Windows

Hardware Wizard appears and I cannot install the driver.

Am I making a mistake in the installation procedures?

A: Close the Windows Hardware Wizard and disconnect

the unit. You must install the driver before connecting

this unit. Insert the CD-ROM included with the

product. The menu for installing the driver appears

automatically.

Select Install Driver, and follow the instructions shown

on the screen. If you have downloaded the driver from

the TASCAM website (htt://www.tascam.com), expand

the ZIP archive, launch the setup.exe file, and follow

the instructions on the screen.

Q: I loaded the installation CD-ROM into a Windows

computer, but the driver installation menu does not

appear. How can I access this menu?

A: The automatic playback settings for the disc drive

might be disabled.

Open the CD-ROM using Windows Explorer, and

double-click the Autorun2.exe file to manually open

the installation menu.

Settings on your computer

Here are a few basic points to help you set up your

computer for best performance with audio applications.

Do not run other applications. You will probably use

your computer for applications other than audio,

but we recommend that you avoid running other

applications at the same time you are running

audio programs. Processing digital audio places a

considerable load on your computer.

This means that if you are running other applications

(especially graphics or Internet tools) at the same time

as your audio application, the processing may not

happen fast enough.

Installing Cubase LE 5

For details see the Cubase LE 5 Quick Start Guide.

9 After the PC has restarted, open the TASCAM

US-1800 (Start > Control Panel) or US-1800 Control
Panel (Start > All Programs > TASCAM). If the Driver

Version, Device and other data appear correctly,

the installation has succeeded.

Installing the driver for Mac OS X

1 Confirm that the US-1800 is not connected to the

computer.

2 Double-click the TASCAM_US1800_Driver_x.xx.dmg on

the included CD-ROM. As the TASCAM_US-1800_x.xx

is created on the desktop, open the folder.

3 Double-click the TASCAM_US-1800_x.xx.mpkg in the

folder to launch the installer.

4 Follow the instructions on the screen to conduct

the installation.

5 Restart the computer and then connect the unit.

Uninstalling the driver

Windows

ª

There are two ways to uninstall the driver as shown below.

Using the Installation CD-ROM:
1 Follow steps 1 to 4 under “Installing the driver for

Windows” (See page 10.)

2 At step 5 of the procedure, click Remove the driver.

3 Follow the instructions on the screen for the

remaining procedure.

Using Windows Add or Remove Programs :
1 Open the
Control Panel from the Start menu.
2 Double click on
Add or Remove programs or Programs

and Features.

3 Select US-1800 driver from the list and click Change

or Remove Programs or Uninstall/change.

4 Follow the instructions on the screen for the

remaining procedure.

3 − Installation