Quantum Data 882E User Manual
Page 16
15
882E Quick Start Guide - HDCP Compliance Testing with Encryption Status Tester (EST) - P/N 68-00210 Rev. B
2. Activate the HDMI-H interface on the output port as follows:
a. Press the
Interface key. A listing of signal interfaces appears on the generator’s
display as shown below.
b. Choose the
HDMI-H item by pressing the adjacent soft key. The interface is
activated and the display is shown below.
Alternatively, to activate the interface through the command line interface, enter the
following commands:
XVSI
4
// Activates the HDMI-H interface
ALLU
// Applies the interface setting to the generator
3. Press the
Tools key and choose the Reports item by pressing the adjacent soft key.
The following is displayed on the generator’s LCD.
4. Select
HDCP to access the HDCP compliance test menu.
The following is displayed on the generator’s LCD.
5. Select
EditPCP to define the capabilities of the HDCP device under.
The following is displayed on the generator’s LCD.
VGA
HDMI-D
CVBS
S-VIDEO
SDI
*
HDMI-H
VGA
HDMI-D
CVBS
S-VIDEO
SDI
*HDMI-H
EDID
Packets
Misc
HDCP
!CompRpt
EditPCP
Source
:DUT Type
0
1
+Source_Out_OnlyRep
:Source_Authe_Cnt
:Source_Max_KSV