Superloader 3a series – Quantum Audio SuperLoader 3A Series User Manual
Page 7
Rack Mounting the Autoloader
7
SuperLoader 3A Series
Figure 2 Installing Two Clip
Nuts
2
Select the long or short autoloader brackets (depending on the depth of the rack), and
then attach them to the rear of the autoloader (see
figure 3
). Use the long autoloader
brackets (72-A226-A) when the distance from the front mounting rail to the rear
mounting rail is less than 30.25 in. (76.84 cm). Otherwise, use the short autoloader
brackets (72-A225-A).
Outer covers
of the rack
Rail
Rail
Rail
Clip nut
1.75 in
(44.45 mm)
Clip nut