Superloader 3a series – Quantum Audio SuperLoader 3A Series User Manual
Page 11
Rack Mounting the Autoloader
11
SuperLoader 3A Series
Figure 7 Connecting Support
Brackets
7
Verify that the autoloader is level. Adjust as needed.
8
When the autoloader is level, tighten all screws securing the autoloader to the rack.
This includes the following:
• Four screws securing the autoloader tabs to the front rails.
• Four screws securing the support brackets to the rear rails.
• Four screws securing the autoloader brackets to the support brackets.
Screws
Support bracket
Autoloader bracket