Quantum Audio SuperLoader 3A Series - Manual (Page 5)

Unpacking the Autoloader 5
SuperLoader 3A Series
Checking Accessories 0 The following accessories are shipped with the SuperLoader 3A Series autoloader:
•
SuperLoader 3A Series Quick Start Guide
• Ethernet cable
• Hardware to rack mount the autoloader (see
figure 1 )
• Four autoloader brackets (two long and two short to accommodate different rack
depths)
• Two support brackets
• Two sets (decimal and metric) of four support bracket 10-32 x 1/4 inch button
head screws (two per support bracket)
• TORX ® L-Key drivers (T8 and T10)
• Power cable
• Documentation CD containing all of the documentation in Adobe
®
Portable
Document Format (PDF)
• Bar code labels
You will also need the following parts that were shipped with your rack:
• Eight clip nuts
• Eight rack screws
Figure 1 Rack Mount
Hardware
Short autoloader
brackets (72-A225-A)
Support brackets
(74-60605-01)
Long autoloader
brackets (72-A226-A)
Support bracket screws
72-A348-A (4) or 90-60227-50 (4)