5 windows nt – Quatech DSP-200/300 User Manual
Page 39
5 Windows NT
5.1 Installing DSP-200/300
To allow easy configuration of the DSP-200/300 the Quatech Device Manager for Windows NT
has been written for the hardware. This configuration utility supports the DSP-200/300 only in
block addressing mode.
To begin the installation, open Windows Explorer and search for the ‘Setup.exe’ command to
install the Quatech Device Manager.
Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA). Once the installation is complete an
icon will be placed on the desktop.
Windows NT Explorer
Windows NT
5-2