Quatech DSP-200/300 - Manual (Page 25)

4 Windows 2000
To allow easy configuration of the DSP-200/300, an Windows 2000 "INF" configuration file
has been written for the hardware. This configuration file supports the DSP-200/300 in both
addressing modes: block mode and “com” mode. Additionally, the RTS-CTS modem control
handshake option and the RS-422/485 output driver enable option for full and half duplex
operation is supported.
4.1 Installing a DSP-200/300 Under Windows 2000.
1. Insert the Quatech COM CD into an available CD-ROM.
2. Insert the DSP-200/300 into any available PC Card socket.
3. You will be prompted tosearch for the correct driver. Choose the drive where the
quatech COM CD is located and select “Browse” from the ‘Files Needed’ window.
Windows 2000 4-2