beautypg.com

Quatech DSP-200/300 User Manual

Page 32

background image

The X8 clock mode locks the ports hardware clock at
eight times the standard rate. The baud rate the port
runs at will always be eight times the rate requested by
the application. This mode is useful for legacy
applications which cannot request baud rates over
115.200.

921,600

X8

The X4 clock mode locks the ports hardware clock at
four times the standard rate. The baud rate the port
runs at will always be four times the rate requested by
the application. This mode is useful for legacy
applications which cannot request baud rates over
115.200.

460,800

X4

The X2 clock mode locks the ports hardware clock at
double the standard rate. The baud rate the port runs at
will always be double the rate requested by the
applications. This mode is useful for legacy
applicattions which cannot request baud rates over
115,200

230,400

X2

The X1 clock mode mimics a standard COM port. The
hardware drivers lock the clock to the standard rate.
The port will run at the baud rate requested by the
application.

115,200

X1

Auto clock mode enables applications to request any
baud rate up to 921,600. The hardware drivers will
select the correct clock multiplier based on the baud
rate requested

921,600

Auto

Description

Max bps

Clock Mode

Data Rate Multiplier

5. Click the RS-422/485 tab to view the transmitter enable and connector pinout option.

4-9

DSP-200/300

(Rev. I and later)

User's Manual