Sylvania SRT2232X - Manual (Page 15)

5-2 L6650EA
2. Initial Setting
General
1. Enter the Service mode. (See page 5-1)
2. Press "VOL p" button on the service remote control
unit. Display changes "C/D," "7F," "LANGUAGE,"
"ACCESS CODE," "SOUND TYPE," "VIDEO
TONE," "FM MODE," "V-OUT," "VIDEO," "AV
MEMO," "STABLE SOUND," "FILTER," "300," and
"YUV MEMORY" cyclically when "VOL p" button is
pressed.
3. To set the following each data value, press "CH o
/ p" buttons on the service remote control unit.
7F --- Set to "FF."
LANGUAGE --- Set to "SPA."
ACCESS CODE --- Set to "ON."
SOUND TYPE --- Set to "MTS."
VIDEO TONE --- Set to "ON."
FM-MODE --- Set to "OFF."
V-OUT --- Set to "OFF."
VIDEO --- Set to "V1/V2."
AV MEMO --- Set to "ON."
STABLE SOUND --- Set to "OFF."
FILTER --- Set to "ON."
Adjusting the monitoring time --- Set to "500."
YUV MEMORY --- Set to "OFF."
3. AV Memory Setting data
General
1. Enter the Service mode. (See page 5-1)
2. When “AV MEMORY” setting to “ON” (refer to “2-1.
Setting for 7F, CHROMA, LANGUAGE, STEREO
TYPE, ACCESS CODE, STABLE SOUND, COMB
FILTER, COMPONENT and AV MEMORY data
Values”), press "VOL o" button on the service re-
mote control unit. Display changes "SPORT CNT,"
"SPORT CLR," "SPORT SRP," "NEWS CNT,"
"NEWS CLR," "NEWS SRP," "MOVIE CNT,"
"MOVIE CLR," and "MOVIE SRP" cyclically when
"VOL o" button is pressed.
3. To set the following each data value, press "CH o
/ p" buttons on the service remote control unit.
SPORT CNT--- Set to "48."
SPORT CLR--- Set to "30."
SPORT SRP--- Set to "34."
NEWS CNT--- Set to "39."
NEWS CLR--- Set to "30."
NEWS SRP--- Set to "28."
MOVIE CNT--- Set to "43."
MOVIE CLR--- Set to "26."
MOVIE SRP--- Set to "24."