One for All URC-7210 - Manual (Page 6)

6
WWW.O NEFORALL.CO M
Direct code set up
To set up the ONE FOR ALL for your television:
1 Find the code for your device in the Code list (page 73 - 81).
Codes are listed by brand name.
The most popular code is listed first. Make sure your
device is switched on (not on standby).
2 Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the red light (LED) underneath the
POWER key will blink once then twice).
3 Enter your (four-digit device code) using the number
keys. The re d lig ht will blink twice.
4 Now, aim the ONE FOR ALL at your device and
press POWER. If your device switches off, the ONE
FOR ALL is ready to operate your device.
5 Turn your device back on and try all the remote’s functions to ensure
they are working properly. If the functions do not work properly,
repeat steps 1-4 using another code listed under your brand.
6 If your device does not respond, follow steps 1 to 4 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 7.
7 Write your code in the four boxes provided in the battery
compartment and on page 8 for easy future reference.
Setting up the ONE FOR ALL
Before you start, please read these instructions carefully
Important notes:
- Most TV’s do not switch on pressing the POWER key. Please try pressing a
“number” key or the “TV-text off” key to switch your TV back on.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
6
WWW.O NEFORALL.CO M
ON
E FO
R A
LL
Acu ra
Adm iral
Ady son
Aga zi
AGB
Age f
Aiko
0009
0087 , 009 3, 03 63, 0 41
0217 , 021 6
0264
0516
0087
0216 , 000 9, 00 37, 0
0037 , 027 4
0361 , 020 8, 03 71,
__ __
704983_URC-7210_E_10T:BIG Easy_1_E_10T 01-06-2007 15:57 Pagina 6