Oricom DECT MI40 - Manual (Page 20)

39 of 72
•
When maximum recording duration for the ICM has reached
or the memory is full if the caller doesn’t hang up, a two-
beeps tone will emit to the user when the recording stops.
The answering machine will release the line.
• If there is CID information from the call, the date and time of
the ICM will be recorded.
Playing ICM
• Press to enter into answering machine mode.
• Press to play the messages.
•
New ICM’s will be played from the oldest new ICM until all the
new messages are played. When there is no new ICM, the
old ICM’s will be played starting from the oldest ICM of the
old ICM’s until all messages are played. A new ICM will be
marked as old once it is played back.
• Press to stop. The display will show STOP.
• A short beep will be heard in between two ICM’s. When all
ICM’s were played, two beeps tone will be heard.
During ICM playing, user can
•
Press or after the first 5 seconds of the
message to replay the current ICM.
• Press within the first 5 seconds of the message to play
the ICM older than the current one unless the current one is
the oldest ICM. Otherwise, the current ICM will be replayed.
• Press to play the ICM newer than the current one
unless the current ICM is the newest. Otherwise, the
playback will be stopped.
•
Press at the first ICM to replay the ICM.
•
Press to view the message info.
• Press to adjust the speaker volume.
When an ICM is played back, the display will show
•
the ICM’s number in the memory, e.g. 05 for message
number 5,
40 of 72
•
the date recorded from the CID, e.g. 02/11, and
•
The time recorded from the CID, e.g. 10:20.
Deleting ICM
During ICM playing,
• Press to delete the current ICM.
• The display will show DELETED until the message is deleted.
A confirmation tone will be heard.
• The next ICM will be played...
•
If the deleted ICM is the last ICM in the memory, the display
will show STOP.
To delete all ICM’s,
• Press to enter into answering machine mode.
• Press .
• The display will show DELETE?
•
Press to confirm.
• Press to cancel the deletion. Press and hold to exit.
• If is pressed. The display will show DELETED. A
confirmation tone will be heard.
Ring Delay
The number of rings allowed before the answering machine answers
the incoming call can be set. There are seven choices: ECONOMY, 2,
3, 4, 5, 6, and 7 rings. When 2 to 7 is selected, the answering
machine will answer the call after the selected number of rings. When
ECONOMY is selected, the answering machine will answer the call
after 4 rings when there is no new ICM/memo or after 2 rings when
there is at least one new ICM or new memo.
To set Ring Delay:
• Press to enter the menu mode