Onkyo TX-8555 - Manual (Page 35)

35
Zone 2
In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you
can select a different source for each room.
This setup allows 2-channel playback (with the speaker
set A and B) in your main listening room and 2-channel
stereo playback in Zone 2, with a different source in each
room.
Hookup
• Use an RCA audio cable to connect the receiver’s
ZONE 2 PRE OUT L/R jacks to an analog audio input
on your Zone 2 amp.
• Connect your Zone 2 speakers to the speaker terminals
on your Zone 2 amp.
Notes:
• The Zone 2 volume must be set on the Zone 2 amp.
• If you’re using a power amp with no volume control in
Zone 2, you must set the Zone 2 Out setting to
Variable (see page 36).
Connecting Zone 2
Receiver
R L
IN
Zone 2
Receiver/
integrated amp
Main room