Oki 6120i - Manual (Page 71)

III - 22
Section 3 - Chapter 2 - OkiNet for NetWare
OKI OkiLAN 6120i User’s Guide
Refresh
The refresh rate defines how often the OkiNet for
NetWare utility updates the main print server list. To
define a refresh rate, select the Automatic Refresh box
and then enter the refresh rate in the field provided.
Decide how frequently to refresh the screen based on
factors such as network traffic and desire for most
recent information. For example, if traffic is not an
issue on your network and the most current information
is desired, set the refresh rate to 1 so the screen is
updated every minute. If network traffic is an issue,
you may wish to set the refresh rate to 10. This would
update the screen every ten minutes and minimize
network traffic.
Permanently Defining SNMP Access
Information
Access to OkiLAN 6120i configuration and diagnostic
information is determined by using community names.
The Special Options window is used to permanently
define access information so it does not need to be
entered each time the OkiLAN 6120i is accessed. To
Get and/or Set information on the OkiLAN 6120i
through OkiNet for NetWare, community names used
by the utility must match the community names
assigned to the OkiLAN 6120i.
To configure the OkiNet for NetWare utility to use the
correct community names, select Special Options from
the File menu.
Serial/Network Numbers
This field displays the serial number of each OkiLAN
6120i or the network number for a network of OkiLAN
6120i products for which the OkiNet utility has defined
access. To add a new serial number or network number
to this list, select the Add button.
Get Community Name
Enter the Get Community Name necessary to access
the OkiLAN 6120i or group of OkiLAN 6120i products
selected.