Replacing brushes, Please read the following carefully – One Stop Gardens 98197 User Manual

Page 11

Page 11

SKU 98197

for technical questions, please call 1-800-444-3353.

ward direction. If the brushes move

in both directions, then the Drive Pin

is jamming inside the Ratchet Gear.

Make certain that the gear is clean

and greased adequately.

replacing brushes

Oil Bearing

here

figure 12

1. Replace Brushes one at a time to

avoid misplacing right and left-hand

side gearing.
Remove the Hopper Bag (12).

Tip the Sweeper back on its housing.

Do not remove Hex Bolts which fas-

ten the Double Brush Retainers (40)

to the Brush Shaft (39).
Loosen the Hex Bolts (73) and Hex

Lock Nuts (60). Slide the Brush out

of the retainers, making note of the

position of the bristles-see Figure 12.
Install new Brush, making certain

overlapping bristles are positioned

the same as before.

please read tHe fOllOwing

carefully

THE MANUFACTURER AND/OR DISTRIBUTOR

HAS PROvIDED THE PARTS LIST AND

ASSEMBLy DIAGRAM IN THIS MANUAL AS

A REFERENCE TOOL ONLy. NEITHER THE

MANUFACTURER OR DISTRIBUTOR MAKES

ANy REPRESENTATION OR WARRANTy OF

ANy KIND TO THE BUyER THAT HE OR SHE

IS qUALIFIED TO MAKE ANy REPAIRS TO THE

PRODUCT, OR THAT HE OR SHE IS qUALIFIED

TO REPLACE ANy PARTS OF THE PRODUCT.

IN FACT, THE MANUFACTURER AND/OR

DISTRIBUTOR ExPRESSLy STATES THAT

ALL REPAIRS AND PARTS REPLACEMENTS

SHOULD BE UNDERTAKEN By CERTIFIED

AND LICENSED TECHNICIANS, AND NOT By

THE BUyER. THE BUyER ASSUMES ALL RISK

AND LIABILITy ARISING OUT OF HIS OR HER

REPAIRS TO THE ORIGINAL PRODUCT OR

REPLACEMENT PARTS THERETO, OR ARISING

OUT OF HIS OR HER INSTALLATION OF

REPLACEMENT PARTS THERETO.

record product’s serial number Here:

note: If product has no serial number,

record month and year of purchase

instead.

note: Some parts are listed and shown for

illustration purposes only, and are not

available individually as replacement

parts.