One for All URC-7740 - Manual (Page 8)

8
WWW.ONEFORALL.COM
Once you have Set-Up your ONE FOR ALL 4, you can blink back your
Set-up Code for future reference.
Example: to blink out your television code:
1.
Press the TV key once.
2.
Press and hold down MAGIC until the ONE FOR ALL
4 red light blinks twice (the red light will blink once
then twice).
3.
Press 9 9 0. The red light will blink twice.
4.
For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the
digit is „0“.
5.
For the second digit of your four-digit code, press 2
and count all the red blinks. If there are no blinks,
the digit is „0“.
6.
For the third digit of your four-digit code, press 3
and count all the red blinks. If there are no blinks,
the digit is „0“.
7.
For the fourth digit of your four-digit code, press 4
and count all the red blinks. If there are no blinks,
the digit is „0“. Now you have your four-digit
code.
Code blink out
(To find out which code is currently programmed)
- To blink back the code for your other devices, press the appropriate
device key during step 1.
1 ……………………………………
2 ……………………………………
3 ……………………………………
4 ……………………………………
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
Quick Code Reference
Make sure you write down the codes for your devices in the
boxes below and in the battery compartment for future easy
reference.
URC-7740_Scand_10T_30nov07:URC-7740 TANGO 4 Scand-grieks 04-12-2007 12:36 Pagina 8