beautypg.com

Setting up the one for all 4, Direct code set-up – One for All URC-7740 User Manual

Page 6

background image

6

WWW.ONEFORALL.COM

Example: To set up the ONE FOR ALL 4 for your television:

1.

Make sure your device (television) you wish to operate
is switched on
(not in standby).

2.

Find the code for your device in the Code List
(page 103 - 115).
The device codes are listed per
device type and brand name. Also the most popular
code for each brand is listed first. If your brand is not
listed at all, try the Search Method on page 7.

3.

Press the device mode key (TV) on the ONE FOR
ALL 4 remote for the device you wish to set up.

4.

Press and hold down MAGIC until the red light
blinks twice (the red light will blink once then twice).

5.

Enter your four-digit device code using the num-
ber keys. The red light will blink twice.

6.

Now aim the ONE FOR ALL 4 remote at your
device (television) and press POWER
. If your
device switched off, the ONE FOR ALL 4 is ready to
operate your device.

Setting up the ONE FOR ALL 4

(How to set-up the ONE FOR ALL 4 to control your devices)

Direct code set-up

- Most TV’s do not switch back on pressing the POWER key, please try

pressing a “number” key or the “TV-text off” key to switch your TV
back on.

- If your device does not respond, follow steps 1 through 6 with each

code listed for your brand. If none of the codes listed for your brand
operate your device, then try the Search Method described on page 7,
even if your brand is not listed at all.

- Some codes are quite similar. If your device does not respond or is not

functioning properly with one of the codes, try another code listed
under your brand.

- If the original remote control from your Video Recorder / DVD player

did not have a POWER key, press PLAY instead of POWER during step 6.

- To set up your other devices, follow the same instructions above, only

press the appropriate device key during step 3.

- Remember to press the correct device key before operating your

device. Only one device can be assigned to a device key.

- Write your device code in the applicable four digit boxes

provided in the battery compartment and on page 8 for future
reference.

ON

E FO

R A

LL

Acu

ra

Adm

iral

Ady

son

Aga

zi

AGB

Age

f

Aiko

0009

0087

, 009

3, 03

63, 0

41

0217

, 021

6

0264

0516

0087

0216

, 000

9, 00

37, 0

0037

, 027

4

0361

, 020

8, 03

71,

_ _ _ _

6

WWW.ONEFORALL.COM

To set up for a second TV, VCR, DVD or SAT
(See mode re-assignment, Page 9).

Devices can be found under the following keys:

Television

Video Recorder

DVD Player

Satellite Receiver
Cable Box

URC-7740_Scand_10T_30nov07:URC-7740 TANGO 4 Scand-grieks 04-12-2007 12:36 Pagina 6