Onkyo DV-CP702 - Manual (Page 41)

41
Configuring the DV-CP702—Continued
Digital Out
With these settings you can specify how the DV-CP702 out-
puts digital audio signals. The options you choose will
depend on the type of AV component that you connect to the
DV-CP702’s digital audio outputs.
■ Dolby Digital Out
With this setting you can configure the DV-CP702 to output
Dolby Digital audio as it is or downmix it to 2-channel PCM.
If you’re connecting the DV-CP702’s digital audio outputs to
an AV component with a built-in Dolby Digital decoder,
select Dolby Digital. If you’re connecting to a hi-fi amp with
a digital input, an AV receiver with a built-in Dolby Pro
Logic decoder, or an external D/A converter, select Dolby
Digital > PCM.
Dolby Digital (default): Dolby Digital audio is output as
it is.
Dolby Digital > PCM: Dolby Digital audio is downmixed
and output as 2-channel PCM digital audio.
■ Linear PCM Out
With this setting you can configure the DV-CP702 to output
digital audio with higher sampling rates (e.g., 96 kHz) as it is
or downsample it to 48 kHz.
If the AV component you connect to the DV-CP702’s digital
audio outputs supports 96 kHz digital audio, select Down
Sample Off. Otherwise, select Down Sample On.
Down Sample On (default): 96 kHz digital audio is
downsampled and output at 48 kHz.
Down Sample Off: 96 kHz digital audio is output as it is.
Notes:
• Some copy-protected DVD-Video discs may use 96 kHz
digital audio only for A/D conversion to the analog audio
outputs.
• With some discs, even if you select Down Sample Off, the
digital audio will be downsampled to 48 kHz, and in some
cases may not be output by the DV-CP702’s digital audio
outputs.
■ MPEG Out
With this setting you can configure the DV-CP702 to output
MPEG digital audio as it is or downmix it to PCM.
If you’re connecting the DV-CP702’s digital audio outputs to
an AV component with a built-in MPEG decoder, select
MPEG. Otherwise, select MPEG > PCM.
MPEG (default): MPEG digital audio is output as it is.
MPEG > PCM: MPEG digital audio is downmixed and
output as PCM digital audio.
■ Digital Out
With this setting you can turn the coaxial and optical digital
audio outputs on or off.
Depending on how you connect the DV-CP702 to your other
AV components, there may be situations where it’s helpful to
be able to turn off the digital audio outputs.
On (default): Digital audio signals are output by the
coaxial and optical digital audio outputs.
Off: Nothing is output by the coaxial and optical digital
audio outputs.
Notes:
• This setting has no effect on the analog audio outputs.
Dynamic Range Control (Dolby Digital only)
With the Dynamic Range Control function you can reduce
the dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume lev-
els—ideal for watching movies late at night when you don’t
want to disturb anyone.
Off (default): The full dynamic range is preserved.
On: The dynamic range of Dolby Digital material is com-
pressed.
Notes:
• The impact of the Dynamic Range Control function
depends on the Dolby Digital material that you are playing
and with some material there will be little or no effect.
On-Screen Language
With this setting you can select a language for the onscreen
setup menus and messages.
English (default): English.
Français: French.
Español: Spanish.
Deutsch: German.
Italiano: Italian.
Audio Menu
DVD
DVD
DVD VCD
Language Menu
DVD VCD CD MP3 WMA
DVD
DVD VCD CD MP3 WMA JPEG