beautypg.com

30 en, Creating panoramic images ( p mode) – Olympus SZ-10 User Manual

Page 30

background image

30 EN

Shooting mode

Option

MAGIC FILTER

1

Pop Art

2

Pin Hole

3

Fish Eye

4

Drawing

*1

5

Soft Focus

6

Punk

X Sparkle

Y Watercolor

*1

Two images are saved, an unmodifi ed image and an
image to which the effect has been applied.

In P mode, the optimum shooting settings are pre-

programmed for each scene effect. For this reason,
some settings cannot be changed in some modes.

The selected effect is applied to the movie. The effect

may not be applied depending on the shooting mode.

Creating panoramic images (p mode)

1

Set the shooting mode to p.

Panorama

Panorama

0.0

0.0

AUTO

WB

AUTO

WB

AUTO

AUTO

14

M

44

MENU

MENU

3D

3D

2

Press

G to go to the submenu.

3

Use

HI to select the desired mode. When

selecting [Auto], press

G

. When selecting

other than [Auto], press the

A button.

4

When shooting with [Auto] (SZ-20)

Use

HI to select the angle of view and then

press the

A button.

Submenu 1

Application

Auto

SZ-10

Three frames are taken and
combined by the camera.
The user only composes the
shots so that the target marks
and pointers overlap, and the
camera automatically releases
the shutter.

SZ-20

Panorama images are
automatically combined just
by swinging the camera in the
shooting direction. Press the
shutter button once to begin
the sequence.

Manual

Three frames are taken and combined
by the camera. The user composes
the shots using the guide frame and
manually releases the shutter.

PC

The frames that were taken are
combined into a panorama image using
the PC software.

For details on installing the PC software, see

“Charging the battery and setting up using the
supplied CD” (p. 13).

When set to [Auto] or [Manual], [Image Size]

(p. 39) is fi xed to 2MB or equivalent.

The focus, exposure, zoom position (p. 21), and white

balance (p. 36) are locked at the fi rst frame.

The fl ash (p. 34) is fi xed to

$ (Flash Off) mode.

To shoot with [Auto] (SZ-20)

To shoot with [Auto] (SZ-20)

1

Point the camera to the start position.

Use

FGHI to select the shooting direction.

2

Press the shutter button to begin shooting. Move

the camera slowly in the arrow-marked direction that
shown on the monitor.

This manual is related to the following products: