Taking a measurement – Omron Healthcare BP785 User Manual

Page 30

Text mode
Original mode

SELECTING THE USER ID

Select your USER ID. Always use the same USER ID when taking a
measurement. The monitor stores the measurement values in the
memory by the USER ID selected. These measurement values are used
to calculate the Morning Averages and Evening Averages.

Slide the USER ID Selection Switch right or left to select USER A or B.

USING THE USER ID

When you select a USER ID the monitor can be set to take one
measurement using the Single Mode or three consecutive measurements
using the TruRead

Mode when you press the START/STOP button.

NOTE:

The default value is set to the Single Mode to take one

measurement.

The TruRead

Mode takes three consecutive measurements.

The monitor will inflate, take a measurement, and deflate three times
separated by a short interval of time between each measurement.

TAKING A MEASUREMENT