Sylvania SRCD348 - Manual (Page 7)

- 6 -
Programmed track selection
You can set the unit to play a selection of
tracks from your disc.
To select specific tracks
• Make sure CD is at stop mode.
• Press Program button. The display
flashes “ 01” and the Programme light
comes on.
• Press >> Skip/Search or << Skip/Search
to select the track number you want.
Press the Program button to memorize the
track. The display flashes “ 02” .
• Now press << Skip/Search or >> Skip/
Search to select the next track you want.
• Press the Program button to memorize the
track.
• Repeat these steps until all the tracks you
want are stored. You can store a maximum
of 20 tracks. You can select a track more
than once.
• Press the Play button. The first pro-
grammed track is displayed and your
selection starts playing.
• After all the programmed tracks have been
played, the CD player stops automatically.
To clear your programmed tracks, simply
press Stop and open the CD door.
Please note
if, during track selection, you press the Play/
Pause button before pressing the Program
button, the track will not be stored in the
program memory and the disc will start
playing from the first selected track.
Repeat disc play
You can set your CD player to repeat play a
single track, the whole disc or your pro-
grammed track selection.
To repeat a single track
• Press << Skip/Search or >> Skip/Search
to select a track.
• Press the Repeat button once. The display
will show a flashing dot to indicate “ track
repeat” is on.
• Press Play/Pause to play the track.
• The selected track will play continuously
until you press Stop or press the Repeat
button twice more.
To repeat the whole disc
• Press the Repeat button twice. The
display will show a solid dot to indicate
“ disc repeat” is on.
• Press Play. The entire disc will play
continuously until you press Stop or press
the Repeat button once more.
To repeat a programmed selection
• Select your tracks.
• Press the Repeat button once.
• Press Play. The programmed tracks will
play continuously until you press Stop or
press the Repeat button twice more.
Caution
This product uses a Caution Laser. Avoid any
direct exposure to the laser beam. Use of
controls, adjustments or procedures not listed
in this guide may result in hazardous
exposure.