Getting started, Switching on, Adjusting the sound – Sylvania SRCD348 User Manual
Page 4
- 3 -
Getting started
Remove the unit carefully from the box.
You may wish to store the packaging for
future use.
Switching on
Mains power
The unit comes with a mains power cable.
When not in use, unplug the unit from the
mains power.
Batteries
Always remove the mains power lead from
the unit for battery operation.
• Remove the battery compartment door at
the back of stereo.
• Load 6 x LR14 “ C “ Size batteries into the
compartment. Make sure the (+) and (-)
ends of the batteries are positioned as
shown outside the battery door (batteries
not included).
Please note
If you are not going to use the unit for some
time remove the batteries.
Battery low indication
The Power light will not come on when the
batteries are exhausted.
Please note
If the unit is connected to the mains, the
Power light will come in.
Adjusting the sound
Turn the Volume knob located on the side to
set the sound level.
BBS
The Bass Boost (BBS) Button is used to
enhauce bass boost sound.
Using headphones
Plug your headphones into the headphones
socket on the side.
The sound will be heard through the head-
phones, not the speakers.
Please note
Headphones should have a 3.5mm diameter
stereo plug and an impedance of 8-32 ohms.