Sylvania SRCD348 - Manual (Page 5)

- 4 -
Using the radio
Select the Function Selector to Radio.
Use the AM/FM band selector to select the
band.
Turn the Tuning knob on the side to select
the channel you want.
To turn the radio off
Set the Function Selector to Tape with all
keys released.
Stereo indicator (FM ST. band only)
When an FM stereo station is tuned in, the
red Stereo light comes on.
When stereo signals are weak and the
reception is noisy, it is often preferable to
receive the program in mono. Switch the band
selector to FM, reception will be less noisy.
Aerial
For best FM reception, extend the telescopic
aerial located at the back of the unit. Move it
around until you get the best reception.
There is a built in ferrite aerial for AM signal.
Move or rotate the unit to obtain the best
Ampitude Modulation(AM) reception.