Omnitron Systems Technology SAM3G User Manual
Page 13
13
8. Operation
The SAM3G can support either the USB port or the Serial RS232 port. The port
configuration is done at the point of sale. Do not operate these 2 ports at the same time !
8.1 Using the USB port
a.
Installing the USB driver
Note
: If the old driver version has been installed, it must be removed, before installing the latest
driver. To uninstall the old driver, follow these steps :
-
Open the Control Panel
-
Double click System, System Properties window appears
-
Select the Hardware tab
-
Select the Device Manager
-
Expand the Universal Serial Bus controllers to show the installed devices.
-
Right click the Sierra Wireless MC87xx device entry and choose Uninstall.
-
Click OK to confirm.
Step1 :
Locate and run the DriverInstaller.exe . Note that there is no feedback, just wait a few
moments for the program to run.
Step2 :
Connect the SAM3G to the PC, using the supplied USB cable. Several Found New
Hardware
balloons appear above the tool tray as the system detects the new devices. After the
devices are detected, the Device Manager will show, in the following categories :
-
Network Adapters : Sierra Wireless HSDPA Network adapter.
-
Port (COM&LPT) :
Sierra Wireless AT Command port (UMTS)
Sierra Wireless CNS port (UMTS)
Sierra Wireless Data Port (UMTS)
Sierra Wireless DM Port (UMTS)
-
Universal Serial Bus Controllers : Sierra Wireless MC87xx device
b. Installing the 3G_Watcher
Note : If the old Watcher has been installed, it must be removed before installing the latest
Watcher. To uninstall the old Watcher, follow these steps :
-
Open the Control Panel
-
Double-click Add or Remove programs
-
Select Sierra Wireless 3G Watcher
-
Click Change/Remove
Step 1 : Run the 3G_Watcher.exe, the 3G_Watcher welcome-window, appears, click Next
Step 2 : Select Australia region, click Next
Step 3 : Select “ I accept the terms in the license agreement” , click Next
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
[email protected]
www.omniinstruments.co.uk
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
www.omniinstruments.com.au
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
www.omniinstruments.net