beautypg.com

Maintenance and storage technical data, English – Omron Healthcare 705IT User Manual

Page 10

background image

English

19

18

Maintenance
and storage

Technical data

• For cleaning the monitor only use a soft, lightly

moistened cloth.
Do not use petroleum spirits, thinners or
similar solvents !

• Stains on the cuff can be carefully removed using

a moist cloth and soapy water.
Do not wash the cuff or make it wet !

• Keep your blood pressure monitor in the storage

case to protect it from dust and moisture.

• Protect your monitor against vibrations and do not

leave it in a place where temperatures are
extremely low (below -20°C) or extremely high
(above 60°C) or with high humidity (+ 85%).

• Do not use your monitor at very low temperatures

(below 10°C) or very high temperatures (above
40°C).

• Do not fold the cuff or air tube together too tightly

and do not crease them.

• Do not carry out repairs of any kind yourself.

If a defect occurs, consult the OMRON distributor
or Customer Services or seek the advice of your
surgical appliance stockist or pharmacist.

• The accuracy of this blood pressure monitor is

designed to last a long time.

• In order to increase the lifetime of the batteries

take them out when you store the device for a
longer period than 2 months.

• Electro-magnetic fields can influence the

measurement. Do not use a portable phone near
this unit.

This device fulfils the provisions of the EC
directive 93/42/EEC (Medical Device Directive).
This blood pressure monitor is designed
according to the European standard EN1060,
Non-invasive sphygmomanometers Part 1:
General requirements and Part 3: Supplementary
requirements for electromechanical blood
pressure measuring systems.

Model:

OMRON 705IT

Display:

LCD digital display

Blood Pressure

Pressure: 0 mm Hg to 299 mm Hg

Measurement Range:

Pulse: 40 – 180/min.

Accuracy:

Pressure: ±3 mm Hg
Pulse: ±5% of reading

Memory:

28 measurements

Inflation:

Fuzzy-Logic controlled by electric pump

Deflation:

Automatic pressure release valve

Pressure Detection:

Capacitive pressure sensor

Measurement Method:

Oscillometric method

Power Source:

4 Alkaline batteries 1.5V (Type LR6) or
AC/DC adapter (optional, 6V = 4W)

Battery Life:

Capacity of new batteries is approx. 300
measurements

Operating Temperature:

10°C to 40°C

Storage Temperature:

-20°C to 60°C

Humidity:

15 to 90% RH maximum

Storage humidity:

10 to 95% RH maximum

Console Weight:

Approximately 380g without batteries

Outer Dimensions:

Approximately 115

(l)

mm x 177

(w)

mm x 71

(h)

mm

Cuff Dimensions:

Approximately 140 mm x 480 mm
(arm circumference 22 – 32 cm)

Accessories:

Medium cuff, CD-ROM, USB cable, instruction
manual, storage case, battery set

NOTE: Subject to technical modification without prior notice

= Type B

• Disposal of this product and used batteries should be carried out in accordance

with the national regulations for the disposal of electronic products.