Specs, Txsr701, Specifications – Onkyo TX-SR601E User Manual
Page 78
78
Specifications
(TX-SR701/701E)
AMPLIFIER SECTION
Continuous average power output (FTC)
All channels:
100 W per channel min. RMS at 8
Ω,
2 channels driven from 20 Hz to 20
kHz with no more than 0.08% total
harmonic distortion.
125 W min. RMS at 6
Ω, 2 channels
driven from 1 kHz with no more
than 0.1% total harmonic distortion.
Continuous power output (DIN)
130 W at 6
Ω
Maximum power output (EIAJ)
160 W at 6
Ω
Dynamic power output (stereo)
2
× 230 W at 3 Ω
2
× 170 W at 4 Ω
2
× 115 W at 8 Ω
Total harmonic distortion:
0.08% at rated power
0.08% at 1 W output
IM distortion:
0.08% at rated power
0.08% at 1 W output
Damping factor:
60 at 8
Ω
Input sensitivity and impedance
PHONO:
2.5 mV, 47 k
Ω
LINE (CD, TAPE, DVD,
VIDEO 1-4):
200 mV, 47 k
Ω
MULTICHANNEL INPUT
(FRONT L/C/R, SURROUND
L/R):
200 mV, 47 k
Ω
(SUBWOOFER):
36 mV, 47 k
Ω
COAXIAL (DIGITAL):
0.5 Vp-p, 75
Ω
DVD, VIDEO 1, 2, 3, 4:
1 Vp-p, 75
Ω
1 Vp-p, 75
Ω (Y)
0.28 Vp-p, 75
Ω (C)
COMPONENT VIDEO 1, 2:
1 Vp-p, 75
Ω (Y)
0.7 Vp-p, 75
Ω (P
B
, P
R
)
Output level and impedance
Rec out (TAPE, VIDEO 1, 2):
200 mV, 470
Ω
Line out:
100 mV, 470
Ω (Zone 2)
Pre out:
1 V, 470
Ω
VIDEO (VIDEO 1, 2,
MONITOR OUT):
1 Vp-p, 75
Ω
1 Vp-p, 75
Ω (Y)
0.28 p-p, 75
Ω (C)
COMPONENT VIDEO OUT:
1 Vp-p, 75
Ω (Y)
0.7 Vp-p, 75
Ω (P
B
, P
R
)
Phono overload:
70 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency response:
10 Hz to 100 kHz: +1/–3 dB
(CD in Direct mode)
RIAA deviation:
20 Hz to 20 kHz: ±0.8 dB
Tone control
Bass:
±10 dB at 50 Hz
Treble:
±10 dB at 20,000 Hz
Signal-to-noise ratio (stereo)
Phono:
80 dB (IHF A, 5 mV input, Direct mode)
Line:
106 dB (IHF A, 0.5 V input, Direct mode)
Muting:
–50 dB
TUNER SECTION
FM
Tuning range:
USA & Canadian models:
87.50–108.00 MHz (100-kHz steps)
Other area models:
87.50–108.00 MHz (50-kHz steps)
Usable sensitivity
Mono:
11.2 dBf, 1.0 µV (75
Ω
IHF)
0.9 µV (75
Ω
DIN)
Stereo:
17.2 dBf, 2.0 µV (75
Ω
IHF)
23 µV (75
Ω
DIN)
50 dB quieting sensitivity
Mono:
17.2 dBf, 2.0 µV (75
Ω
)
Stereo:
37.2 dBf, 20 µV (75
Ω
)
Capture ratio:
2.0 dB
Image rejection ratio
USA & Canadian models:
40 dB
Other area models:
85 dB
IF rejection ratio:
90 dB
Signal-to-noise ratio
Mono:
76 dB
Stereo:
70 dB
Alternate channel attenuation:
55 dB
Selectivity:
50 dB (DIN)
AM suppression ratio:
50 dB
Total harmonic distortion
Mono:
0.2%
Stereo:
0.3%
Frequency response:
30 Hz–15 kHz, ±1.0 dB
Stereo separation:
45 dB at 1 kHz
30 dB at 100 Hz–10 kHz
AM
Tuning range
USA & Canadian models:
530 to 1,710 kHz (10-kHz steps)
European & Australian models:
522 to 1,611 kHz (9-kHz steps)
Worldwide models:
522 to 1,611 kHz (9-kHz steps)
530 to 1,710 kHz (10-kHz steps)
Usable sensitivity:
30 µV
Image rejection ratio:
40 dB
IF rejection ratio:
40 dB
Signal-to-noise ratio:
40 dB
Total harmonic distortion:
0.7%
GENERAL
Power supply
USA & Canadian models:
AC 120 V, 60 Hz
European & Australian models:
AC 230–240 V, 50 Hz
Some Asian models:
AC 220–230 V, 50/60 Hz
Worldwide models:
AC 220–230 and 120 V switchable,
50/60 Hz
Power consumption
USA & Canadian models:
6.0 A
Other models:
620 W
Dimensions (W
× H × D):
435
Ч 175 Ч 431.5 mm
17-1/8"
Ч 6-7/8" Ч 16-15/16"
Weight
USA & Canadian models:
26.9 lbs.
Other models:
13.0 kg
REMOTE CONTROLLER
Transmitter:
Infrared
Signal range:
Approx. 16 ft., 5 meters
Power supply:
Two “AA” batteries (1.5 V
× 2)
Specifications and features are subject to change without notice.