Oster Digital Countertop TSSTTVDFL1 - Manual (Page 18)

English-18
u
sing the
r
eheat
F
unction
(s
ee
F
ig
. 11)
Step 1. Turn the Function Knob to the Reheat
function.
Default Temperature: 325ºF.
Default Time: 15 minutes.
You may manually activate the Turbo
Convection Heat by pressing the Turbo
button once to turn it on. The blue light of
the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature Knob if you wish to
increase or decrease the temperature setting.
For the Reheat function, the temperature
can be set from 150 to 450ºF in 5-degree
increments.
Step 3. To set the time:
Turn the Time Knob if you wish to increase
or decrease the reheating time. The maximum
time setting for Reheat is 60 minutes (1 hour).
Once you have selected the desired reheating
time, press the Start button to initiate the
reheating process.
Step 4. To Start:
Press the Start/Cancel Button to start the
reheating process. The red Start/Cancel
Button light will illuminate. The LCD
Display will show the Reheat Function,
the countdown time and the selected
temperature. The unit will begin to work
and the timer will start counting down.
When the Reheating cycle is complete, the
unit will emit 3 beeps. The LCD and the
Start/Cancel Button Light will turn off after
30 seconds.
NOTE: You can cancel the reheating cycle at any
time by pressing the Start/Cancel Button
once. The red Start/Cancel Button light
will turn off whenever a function has
been completed or a function is manually
cancelled.
Figure 11