Omega DPF76 - Manual (Page 16)

11
PRESS DISPLAY REMARKS
PRGM
PRGM
ENTER
ENTER
SETTING
THE
COUNTER
STEP
2
DPF75
&
DPF76
ONLY
factor
count
rst 0
or
set pr
dp loc
a net b
or
a sep b
a sub b
or
a add b
hi cps
or
lo cps
ENTER
ENTER
ENTER
This section of the menu sets up the counter
information.
Press the PRGM key to choose RST 0 (reset
to 0, count up) or SET PR (set to preset, count
down), press the ENTER key to enter the
displayed choice.
This sets the decimal location for the A & B
counters. Press the arrow key under the
desired digit location. To clear the decimal,
press the arrow key furthest to the right. Press
the ENTER key to enter the displayed loca-
tion.
Press the program key to choose A NET B
(add or subtract A & B) or A SEP B (view A &
B as separate counters). Press the ENTER
key to enter the displayed choice.
This section will only appear if A NET B was
selected. Choose A SUB B (A subtract B) or
A ADD B. Press the ENTER key to enter the
displayed choice.
Press the PRGM key to choose HIGH CPS
(0-9.99KHz) or LOW CPS (0-40Hz). Press
the ENTER key to enter the displayed choice.