Oregon Scientific BAR609HGA User Manual

Page 15

Text mode
Original mode

4. You can place the sensor in the ground. To do this, fix

the stake into the base of the sensor.

Then place the stake into the ground up to the insertion
level indicator (see point 1 below) at your desired
location.

UV SENSOR (UVN128)

The UV sensor measures the UV Index. It transmits data
to the main unit every 73 seconds and has a maximum
transmission range of 328 feet (100 meters).

SETUP SENSOR

1. Insert the batteries as shown.

2. Close the battery door and press RESET to turn the

sensor on.

3. Press and hold CHANNEL and MEMORY on the main

unit to initiate a signal search. The UVI sensor icon
on the main unit will flash to show it is searching
for the sensor. It will stop flashing when it has found
the sensor. If the main unit cannot find the sensor,
"- -" will appear on the LCD.

u v se

n s o

u v se

n s o

s e n s o r

u v

BAR609HGAmanual-ENG

05/1/18, 7:12 PM