Oregon Scientific BAR609HGA - Manual (Page 12)

EN
11
BAROMETER
This product tracks barometric pressure changes over
the past 24 hours to provide the weather forecast
and a trend line showing the direction of barometric
change. Barometric changes are measured by the main
(indoor) unit.
BAROMETRIC TREND
SET UNIT AND ALTITUDE
You can set the unit of measurement (mb or inHg) and
altitude. Doing this allows the product to take more
accurate barometric measurements.
TREND DESCRIPTION
Rising
Steady
Falling
VIEW ALARM SETTINGS
Press . The alarm time and status will show in the
Clock Area.
SET ALARM
1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press or to change
settings. Press to confirm.
ACTIVATE ALARM
P r e s s t o a c t i v a t e o r d e a c t i v a t e t h e alarm .
shows in the Clock / Alarm Area when the
alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press SNOOZE / LIGHT to
silence it for 8 minutes. Or, press to turn it off until
the next day.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after
8 minutes.
BAR609HGAmanual-ENG 05/1/18, 7:12 PM 11