Oregon Scientific BAR609HGA - Manual (Page 11)

EN
10
To force a manual search for Atomic Clock signals, press
and hold for 2 seconds. If no signal is found, check
the batteries.
NOTE If the Atomic Clock signal is received and the
hour is incorrect, use the "time zone offset" feature to
adjust it to the appropriate time zone. Please see "Set
Clock section" for instructions.
TURN ATOMIC CLOCK ON / OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold for 2 seconds. Then, manually
set the clock following the Set Clock section for
instructions.
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF.
STRONG SIGNAL WEAK SIGNAL NO SIGNAL
SET CLOCK
You only need to do this if you cannot receive the Atomic
Clock signal, or you wish to adjust the appropriate time
zone.
1. Press and hold MODE for 2 seconds. The Clock Area
will blink.
2. Select the time zone, hour, minute, year, month, day,
and language. Press or to change the setting.
Press MODE to confirm.
NOTE The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish.
NOTE The time zone options are (PA) Pacific, (CE)
Central, (MO) Mountain, and (EA) Eastern.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
ALARM
This product is equipped with a 2-minute crescendo
alarm.
BAR609HGAmanual-ENG 05/1/18, 7:11 PM 10