Olympus E-100 - Manual (Page 36)

CONNECTING TO EXTERNAL EQUIPMENT
E-135
4. Select the Card Browser setting you want.
When you want this
To turn off the Card Browser (no HTML files
generated)
Maximum performance, including access to
image properties and slideshow capabilities
• This format uses high-level Java Script, and
requires Microsoft Internet Explorer 4.01 or
later or Netscape Communicator 4.5 or later.
Light image viewing with access to image
properties
Basic image viewing with slideshow
capabilities
• This format uses high-level Java Script, and
requires Microsoft Internet Explorer 4.01 or
later or Netscape Communicator 4.5 or later.
Basic image viewing
Select this
Off
Type1
Type2
Type3
Type4
5. After selecting the setting you want, press
SET/DISP.
• When you turn on any Card Browser (Type 1 through
4), the camera creates a file named “INDEX.HTM” in-
side the DCIM folder whenever you turn off camera
power. Other files are also created and stored on the
memory card at this time.
• Pressing in place of SET/DISP in step 5 imme-
diately starts creation of Card Browser files, which is
indicated by the message “One moment please...” on
the monitor screen. Never turn off camera power while
this message is on the display.
NOTE
• If the memory card in the camera has a large number
of files on it, it may take quite a bit of time for the cam-
era to create the required HTML files and turn off. Be-
cause of this, we recommend that you normally leave
the Card Browser turned off. We suggest that you turn
off the Card Browser if you normally do not need to
use it. The power down routine performed by the cam-
era is much shorter when the Card Browser is turned
off.