Oki 8100e User Manual

Page 92

UNIX 92

Verify the printer status using the lpstat command.

# lpstat –pC5300_lp

The result of lpstat may not be displayed correctly depending on
UNIX operating system specification (e.g. Solaris 2.x).

FTP printing

FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If
the print data is sent to a logical printer via FTP, it is printed.

Refer to the workstation’s manual for details of the ftp command. The
following explanation uses print file test.prn with printer name
C5300_lp as an example.

Logical directories

OkiLAN 8100e includes three logical directories.

lp must be used for printing a file created using the printer driver.

sjis must be used for printing a text file of Shift JIS Kanji code.

euc must be used for the printing a text file of the EUC Kanji code

jis and euc function only as PostScript printers.

You can not send data to the root directory.

When printing with ftp, use any values for name and password.
However, if the user name is [root], the password set under TELNET or
the utility is required. See the appropriate section for details.

Example: Logging in with host name C5300 (or IP address
192.168.20.127).

# ftp C5300 (or ftp 192.168.20.127

Connected to C5300

Logical directory

Printer function

For direct output

sjis

For Shift JIS Kanji converted output

euc

For EUC Kanji converted output