Oki 8100e - Manual (Page 8)

OkiLAN 8100e Configuration 8
Configuration utility
Available utilities
You can configure the OkiLAN 8100e by using one of the following
methods:
Utility Features System requirements
Quick Setup Configure the OkiLAN 8100e easily
and simply without installing any
software packages into your
system. You can set the following:
Enable/disable TCP/IP, NetWare,
EtherTalk, NetBEUI protocols.
> Set IP address, Subnet Mask
and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare Mode and create
Queue/Print Server/Printer
objects.
> Zone name and Port name for
EtherTalk.
Windows95/98/Me/NT4.0/2000/
XP (TCP/IP protocol or IPX/SPX
protocol should be installed).
To create a NetWare queue,
NetWare Client 32 or IntranetWare
Client should be installed in your
system.
AdminManager Configure the OkiLAN 8100e in
detail.
Windows95/98/Me/NT4.0/2000/
XP (TCP/IP protocol or IPX/SPX
protocol should be installed).
To create a NetWare queue,
NetWare Client 32 or IntranetWare
Client should be installed in your
system.
Web browser Configure the OkiLAN 8100e and
printer by using a Web browser such
as Microsoft Internet browser or
Netscape Navigator. Microsoft Internet Explorer Version
3.0 and higher or Netscape
Navigator Version 3.0 and higher.
Operating system that supports
Web browser.
TELNET Configure the OkiLAN 8100e using
TELNET. Third-party vendor developed
TELNET client package.
A TELNET Application is standard in
Windows/UNIX/Linux.
SNMP The printer and network card can be
controlled using third-party vendor
developed SNMP application. Third-party vendor developed
SNMP application.