Oki 8100e - Manual (Page 57)

Microsoft Windows 57
11. Confirm your configuration. If everything is correct, select
[Execute] to apply the configuration. Set-up has now been
completed. Select [Finish].
Now that both Windows and the printer have been configured to use
TCP/IP, the next step is to configure Windows to print to the network
printer.
Windows 95/98/Me
When printing using TCP/IP the OkiLPR utility is the only option to use.
The following procedure should be used.
When installing the driver, ensure it is installed as a local printer and
not a network printer. Ensure the appropriate printer driver has been
installed in Windows.
Install the OkiLPR utility as described on page 49 of this manual and
add the printer installed earlier.