Optiview MPEG-4 - Manual (Page 22)

User’s Manual
22
3.5.2 Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend
recording schedule. Select from the Record Setup menu
and press ENTER; the following menu is displayed.
Schedule Setup
1. Day Time Start
2. Day Time End
3. Night Time Start
4. Night Time End
5. Weekend Schedule
6. Weekend Start
7. Weekend End AM 06:00
PM 06:00
PM 06:00
AM 06:00
YES
Fri 18:00
Mon 06:00
• Make appropriate changes of the start time of Day and Night Time using
Direction keys.
• Press ENTER to confirm the settings or ESC to cancel.
• If you want to have a weekend record, choose to enable the
Weekend Schedule in advance and then set the Weekend Start/End time.
• Press ESC to back to previous page.
3.5.3 Preset Record Configuration
The is used to select the preset recording quality and frame
rate. In normal circumstances, we strongly suggest you set the item to
, the default. Below tables show the PPS and picture size under
in Full-D1 mode, Half-D1 mode and CIF mode, respectively:
Halfl-D1 mode (NTSC: 720x240@60PPS; PAL: 720x288@50PPS)
Normal PPS Normal Size Event PPS Event Size
3.75 NTSC
(3.125 PAL)
11 KB
15 NTSC
(12.5 PAL)
17 KB