One Stop Gardens Greenhouse 44712 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. Item 47712
Specifications
Overall Dimensions 98-1/2″ L x 75-7/8″ W x 77″ H
Window Dimensions 23″ L x 20″ W
Door Dimensions 64″ H x 24″ W x 1-1/4″ Thick
Materials
Aluminum Frame
Transparent Polycarbonate Sheets
Aluminum Thickness 0.038″
Polycarbonate Sheet Thickness 0.165″
Foundation Installation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
IMPORTANT–READ THE FOLLOWING CAREFULLY BEFORE PROCEEDING
• Prior to assembly, a proper foundation must be laid. The greenhouse must be properly
supported to help prevent property damage and injury in the event of strong winds or
inclement weather. Wind and ground conditions may vary from site to site, and may affect
the practicality and effectiveness of anchoring methods substantially. If you have any
doubt regarding the stability of the foundation you are to use, consult a professional.
• It is always your responsibility to ensure that the greenhouse is properly anchored.
Harbor Freight Tools cannot be held responsible for personal injury, damage to the greenhouse,
or other property damage that occurs as a result of improperly anchoring the greenhouse.
• Be certain to check with local authorities to obtain all required building permits
and to familiarize yourself with any building codes that may apply.
• Decide on a location for the greenhouse. The location should optimally be a
level, well-lit area that is sheltered from the wind. The door of the greenhouse
should not open towards the prevailing wind, if possible.
SAFETY
FRAME
MAINTENANCE
FOUNDA
TION