Olympus CAMEDIA P-330N - Manual (Page 75)

Troubleshooting (continued)
Notes
• If the READY indicator
does not turn on after
having removed the
jammed paper, turn the
power off and on again.
Try printing from the
camera or computer
again.
• If you cannot remove
the jammed paper,
contact Olympus.
If the print paper is jammed
If the print paper is jammed, all indicators flash and
printing stops. Turn off the power and remove the
jammed paper.
Remove the jammed paper from the paper outlet
on the rear panel
Remove the jammed paper from the paper inlet on
the front panel
Remove the jammed paper from the automatic
feeder
Pull out the jammed
paper slowly.
Pull out the jammed
paper slowly.
Pull out the jammed
paper slowly.
For Your Information
32