Nomenclature dimensions, E5zn-drt – Omron DeviceNet Communications Unit E5ZN-DRT User Manual

Page 5

E5ZN-DRT

Nomenclature

Dimensions

Note: All units are in millimeters unless otherwise indicated.

BCDEF

3 45

×10

NODE
ADR

×1

UP/DN

COPY

E5ZN-DRT

Front Panel Rotary Switches

Front Panel DIP Switch

DeviceNet Connector

Back Panel DIP Switch

Pin 1: I/O allocation setting switch
Pin 2: Not used (Set to OFF.)

Back Panel Rotary Switch

Terminal Unit Connector

Connects to DeviceNet communications
cables. Power for DeviceNet communica-
tions is also supplied though this
connector. An FCK2.5/5-STF-5.08AU
connector (Phoenix Contact) is
provided.

Used to set the node address when
functioning as a DeviceNet slave.

Connects to the E5ZN-SCT24S
Terminal Unit.

Used to set the maximum unit number
when simple I/O allocation is used.

Used to specify whether the connection
configuration and I/O allocation is set
using simple I/O allocation or Configurator
I/O allocation.

Used to copy (backup) parameters between
the Temperature Controllers and DeviceNet.

UP/DN (Pin 2): Sets the copy operationmode
(i.e., upload or download).

COPY (Pin 1): Starts the copying.

Indicators

E5ZN-DRT

72.8

89.6

(107.5)

4.7

130

Dimensions when Mounted to the
E5ZN-SCT24S Terminal Unit

Note: Be sure to read the precautions for correct use and other precautions in the following user’s manuals before using the

Communications Unit.
E5ZN-DRT DeviceNet Communications Unit Operation Manual (Cat. No. H119)
DeviceNet Operation Manual (Cat. No. W267)

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

http://www.ia.omron.com/