Omron DeviceNet Communications Unit E5ZN-DRT - Manual (Page 3)

E5ZN-DRT
Model Number Structure
■ Model Number Legend
Ordering Information
■ List of Models
Note: A DeviceNet Communications Unit and Terminal Unit are required to connect to DeviceNet. Two End Plates are provided with E5ZN-SCT24S
Terminal Units. When mounting to a DIN track, be sure to mount End Plates on both sides.
Specifications
■ Ratings
Note: 1. Do not use an inverter output as the power supply. (Refer to Safety Precautions for All Temperature Controllers.)
2. The power consumption for the Temperature Controllers is not included.
1
E5ZN-DRT
1.
DRT: DeviceNet communications
Name External input power
supply voltage
Applicable Temperature
Controller
Model
DeviceNet Communications Unit 24 VDC E5ZN E5ZN-DRT
Terminal Unit E5ZN-SCT24S
Power supply voltage DeviceNet 24 VDC (for internal circuits)
External input power supply 24 VDC (for RS-485 communications circuits and Temperature Controllers)
Allowable voltage range DeviceNet 11 to 25 VDC
External input power supply 20.4 to 26.4 VDC
Power consumption
(See note 2.) DeviceNet Approx. 1.1 W (for a current of 45 mA at 24 VDC)
External input power supply Approx. 0.5 W (for a current of 20 mA at 24 VDC)
Connectable Temperature Controllers E5ZN Series
Maximum number of connectable Temperature Controllers 16
Ambient operating temperature −10 to 55°C (with no icing or condensation)
Ambient operating humidity 25% to 85%
Ambient storage temperature −25 to 65°C (with no icing or condensation)
http://www.ia.omron.com/
3
(c)Copyright OMRON Corporation 2007 All Rights Reserved.