Oricom S209 - Manual (Page 14)

Call
- 10 -
If you move too far away from the base unit while you are on the phone, you will hear warning tones notifying you that your handset is
almost out of range – lost link. Take your handset closer to the base unit or your call will be cut off shortly after the warning.
SWITCHING YOUR HANDSET ON/OFF
Switching on your handset
1. Press . The handset may take a few seconds to power up.
Switching off your handset
2. Press and hold . The handset’s screen turns off.
SETTING THE CLOCK
Your phone has a calendar and digital clock. Set the date and time before initial use of the phone.
If the base’s power resets, the clock resets to 12:00AM (for 12-hour format) and 00:00 (for 24-hour format), and the date resets to the
factory default date.
Selecting the date format
1. Press
MENU
.
2. Select SETTINGS. Press OK.
3. Select DATE AND TIME. Press OK.
4. Select DATE FORMAT. Press OK.
5. Select the date format you want.
6. Press
OK to confirm. The new setting is saved.
Setting the date
1. Press
MENU
.
2. Select SETTINGS. Press OK.
3. Select DATE AND TIME
. Press OK.
4. Select DATE. Press OK .
5. Press LEFT or RIGHT to select the value for the Month/Day/Year.
6. Press DOWN to set the next item.
7. Press OK when finished. The new setting is saved.
Selecting the time format
1. Press
MENU
.
2. Select SETTINGS. Press OK.
3. Select DATE AND TIME. Press OK.
4. Select TIME FORMAT. Press OK.
5. Select the time format you want.
6. Press
OK to confirm. The new setting is saved.
Setting the time
1. Press MENU .
NOTE: If your handset has lost the link with the base, you will not be able to make or receive any call. In
addition, you will not be able to carry out many of the phone functions and features.
NOTE: Your handset cannot receive any call if the power is switched off.
TIP: Use UP and DOWN to navigate the menus.